What’s the proper way to maintain my hot tub? This seems to be a significant question many homeowners have been asking. Undoubtedly, you want to be able to enjoy your hot tub at a moment’s notice and without hassle. So, how do I maintain my hot tub?
1. Keep the Water Clean and Balanced
Usually, you’ll be instructed on the basics of maintaining your hot tub when you purchase it. This will include information on how to keep the water clean and balanced. The dealer should also give you a user guide that contains most, if not all, of this information. If you don’t have any of this, though, don’t worry. Maintaining the cleanliness and balance of your hot tub water is not difficult. You need to be consistent with it. To start, you’ll need to test the pH levels of your water at least once a week. The ideal range is between 7.2 and 7.6. You can adjust it with pH increasers or decreases if it’s too high or too low. You can buy these at most pool and hot tub supply stores.
2. Maintain the Water Level
Ensure that your hot tub’s water level is always at the recommended level. This is usually around the middle of the skimmer opening. If the water level gets too low, it will strain the pump. On the other hand, if it gets too high, it might overflow and cause damage to your hot tub. Avoid a situation where you have to choose between the two.
3. Clean the Filters Regularly
Depending on how often you use your hot tub, you should clean or replace them at least once a month. If you live in an area with high pollen counts, you might have to do it more often. To clean your filters, you can rinse them with a hose or soak them in a bucket of filter-cleaning solutions. You can also buy filters and cleaners at most pool and hot tub supply stores.
4. Change the Water Regularly
Even if using the best and most influential hot tub chemicals, you must change the water regularly. Depending on how often you use your hot tub, you should vary the water every three to four months. If many people use it frequently, you might need to do it more often. After draining the water, you can now refill your hot tub. You’ll need to attach a hose to the fill valve and turn on the water to do this. Fill it up until the water level reaches the middle of the skimmer opening.
Maintaining your hot tub is crucial if you want it to last long and function properly. By following the tips above, you can be sure that your hot tub is always clean and ready for use. Remember to be consistent with your maintenance routine and change the water regularly. Doing so will ensure that you get the most out of your investment. Contact A-1 Pools & Spas for all your hot tub needs.
Categorised in: Hot Tubs