Here’s Why You Need to Keep Water Off Your Pool Cover
A pool cover is a fantastic investment to protect your pool in both winter and summer from debris and to protect children or pets from falling into the water. However, one of the major downsides of pool covers is that they tend to collect water and debris over time.
Wintertime, in particular, is notorious for dumping heaps of snow or rainwater onto your pool cover, which is not always easy to remove. That being said, pool supplies in New Haven County, CT can be expensive, which means you’ll want to take as many precautions as possible to keep them in good shape. One way to do this is by removing the water from your cover.
Water accumulation can damage pool covers
Allowing water to pool on the top of your cover can cause damage to both the cover and your pool, depending on the type of each. This is because pool covers are not made to withstand the weight of water (or anything else) on top of them.
Even the smallest amounts of water can add up, putting pressure on the seams of the cover and starting to weaken it. This pressure can cause rips in your pool cover and even make the cover collapse into the pool.
Lots of water accumulation on an above-ground pool cover can also put stress on the pool frame itself, which can be both dangerous and expensive.
Additionally, you have to think about what will happen to all that stagnant water if you do leave it on the cover for a while—especially in winter. Some water might freeze, which can stress your cover more. And once it melts and it’s time to remove the cover, all that dirty water will get dumped straight into your pool if you don’t pump it off.
How to keep your pool cover water- and snow-free
There are a few key tricks to keeping water and other debris off your pool cover to protect it. After it rains, you should remove standing water as soon as possible. To do this, you’ll want to use a siphon or a water pump.
An automatic pool cover pump is one of the most useful pool supplies in New Haven County, CT because it can remove standing water from your cover without you needing to do the work. You only need to check on the pump once in a while to ensure it’s still functioning properly and isn’t clogged.
Snow is handled a little differently. It’s still important to remove because it can get heavy quickly. You want to remove snow as soon as possible so it doesn’t freeze. Use a roof rake or similar tool to push snow from the cover. Just make sure the tool you use does not have a sharp edge—otherwise, you might rip the cover!
If there is ice on the pool, you must let it melt before you pump the water off. Try to avoid disturbing ice on a pool cover, since its sharp edges can cause tears easily.
If you don’t have a pool cover to protect your new pool, visit A-1 Pools & Spas! We stock a wide array of pool supplies in New Haven County, CT to meet your needs, from pool covers and pumps to toys and chemicals.
Categorised in: Uncategorized